2 oz. AG-750 Slow
VERY HIGH VISCOSITY FORMULA
SUPER THICK AND SUPER STRONG
ALLOWS PART POSITIONING FOR APPROXIMATELY 30 TO 40 SECONDS
USE AG-QT4 TO ACCELERATE CURE TIME
Uses:
AG-750 Is called a thick formula. The thicker the formula, the slower the cure time. Although it is thick it is still a liquid and will flow. Penetration into porous materials is very minimal. SLO ZAP is an excellent gap filler and provides extra time when positioning wood parts. In modeling its ideal for laminating wood parts and forming fillets. Because its thick, it will not run, it forms a very clean even fillet around all types of joints. The high cured strength means it works great on higher stress areas. This is a specialty glue and mostly used in modeling, wood working, antique furniture repair, and mold / pattern shops. Wood turners use this product as the final filler when repairing larger cracks. Furniture refinishers use this glue in conjunction with AG-QT4 to repair loose chair rungs, and mortis and tenon joints. Mold and pattern shops use it to fill in cracks and seams. Use it on fiberglass and fabric to partially fill in the weave and to bond the cloth to the substrate. When dry it produces a very hard surface.
Helpful Hints:
This glue is SLOW but STRONG!! Use it on harder types of wood. For maximum strength let SLO ZAP cure on its own, best accomplished by providing some light to medium clamping pressure on the pieces to be joined. AG-750 will set up faster when sprayed with Accelerator, the outside will cure immediately but still allow about 30 seconds to allow the inside to fully cure. To speed the cure time and still have a few seconds of positioning, spray AG-QT4 on one part, let dry, apply AG-750 to the other, then join the two parts. When fixing furniture joints, separate the parts if possible, treat the tenon or rung with ZIP KICKER, making sure not to get any on the other part, let the kicker dry, put AG-750 in the mating part and join the two together. When using on fiberglass cloth or fabric spread it across the material with an old playing card, business card, or a soft plastic spreader. For critical applications test sample joints for designed strength requirements.
